Produse pentru magnet din (3376)

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:MFAQm25x9x5 Grade:24/23 L mm:25 +0.3/ -0.3 B mm:9 +0.2/ -0.2 H mm:5 +0.1/ -0.1 Magnetization:axially Weight g:5.5 Temperature °C:250

Bille aluminium. Bloc de serrage à aimant néodyme, corps de base en acier. Bague d'appui en acier garnie de cuir. anodisé. Corps d'appui nickelée chimiquement. Les billes de serrage aimantées sont utilisées pour maintenir les composants dans une position de travail optimale lors du polissage, du montage et du soudage laser. Les billes peuvent être inclinées jusqu'à 90° selon la géométrie ou le poids de la pièce à maintenir. L'aimant peut être actionné ou libéré en utilisant la clé en T six pans fournie. Référence:09230

In unserem Sortiment finden Sie über 150 Kühlschrankmagnete in verschiedenen Ausführungen. Magnettiere, Magnetblumen, Beton-Magnete, Glas-Magnete, Lego-Magnete und viele mehr.

Permanent-Magnetrundfutter vom Typ RM, mit verstärktem keramischem Magnetsystem werden zum Aufspannen von massigen und schweren Werkstücken verwendet. Die Magnetkraft ist stufenlos regulierbar, in die Oberfläche eingearbeitete Zentrierrillen erleichtern die Ausrichtung des Werkstücks. In die Spannfläche kann eine Zentrierbohrung eingebracht werden. Aufbau — Keramik Magnetsystem, Alugrundkörper — Max-Polteilung 5+8mm — Nennhaftkraft ca. 140 N/cm2 — Magnetfeldhöhe ca. 8mm — Abnutzbarkeit der Polplatte 8mm — Schaltweg MAG - ENT-MAG 500° Empfehlung Superstarkes Rundfutter zum Drehen, auch für grobe Teile

Accessoire pour le levage et la manutention de charges ferreuses, planes ou cylindriques, brutes ou usinées. Caractéristiques Anneau de grande dimension pour un montage direct sur les crochets. Simples d'utilisation Rapport pods/puissance très avantageux En cas de chocs, pas de détériorations dommageables...

Application: Industrial Automation Motor Shape: Block, Cylinder, Disk, Rings, Segment, Tile, Arc, Sector, Special Shapes. Materials: Sintered NdFeB Magnet/Neodymium Magnet Grade: N30H～N50H,N30SH～N48SH, N28UH～N48UH, N28EH～N40EH Coating: NI, NiCuNi, ZN, Epoxy, etc. Density ≥7.55g/cm3 Size: As per customers’ design Quality Management System: IATF 16949:2016 / ISO9001:2015 Occupational Health and Safety: ISO 45001:2018 Environmental Management: ISO 14001:2015 HS Code: 8505111000 /8505119000 Manufacturer: Ningbo Zhaobao Magnet Co., Ltd. Brand: ZHAOBAO MAGNET Coating:NI, NiCuNi, ZN, Epoxy Brand:ZHAOBAO MAGNET Temperature:120~180 °C

Aplicaciones: . Para piezas planas y redondas, gracias a los polos en V. . En ingeniería mecánica, fabricación de herramientas, industrias del acero, construcción naval, empresas de transporte o almacén de materiales. Ventajas: . Elevación absolutamente segura: con un factor de seguridad de 3 (la fuerza de atracción es 3 veces superior a la fuerza de elevación recomendada). . No provoca daños en la superficie de la pieza de trabajo. . Accionamiento ON/OFF suave mediante la palanca manual.

Tableau blanc magnétique avec surface d’écriture en acier émaillé doté d’un cadre en aluminium anodisé noir ou blanc et de coins en onglet. Disponible en version mobile ou fixe, la série ONE présente une ligne épurée et moderne. Fixation invisible Profondeur par rapport au mur 20 mm Surface magnétique en acier émaillé Certifié E3, recyclable à 99% Surface d’écriture garantie 30 ans ! Réference:91127S Marque:Lintex Hauteur:120,7 cm Largeur:100,7 / 150,7 / 200,7 cm Profondeur:1,7 cm (depuis le mur)

Conjunto de blocos de construção de veículos de engenharia de dinossauro magnético, 106 peças, montagem diy Idade 2-3 anos, 4-6 anos Local de origem Guangdong, China Materiais Plástico Conjuntos de pacotes Brinquedos de bloco de construção magnético DIY estilo Função de montagem DIY / desenvolver habilidades práticas da criança Ajuste para maiores de 3 anos Pagamento T/T ou L/C ou conforme seu pedido A amostra pode fornecer amostras Serviço OEM/ODM/FCL/LCL Serviço personalizado Aceite personalização personalizada Pedido de teste aceito Nossa vantagem Venda diretamente pela fábrica/tempo de entrega rápido/OEM aceitável Certificação EN71/ASTM/HR4040/10P/CPSIA/CA65/CPC/CE/DOC

Wij bieden een ruime keuze aan producten met individuele prints, zoals mokken, pennen, stickers en magneten. Dankzij onze diensten kunt u uw dagelijkse artikelen personaliseren en unieke reclamegadgets creëren die aansluiten bij uw merkimago. Onze hoogwaardige producten met individuele prints zijn een uitstekende manier om de visuele identificatie van uw merk te versterken en een band met uw klanten op te bouwen. Neem contact met ons op om uw behoeften te bespreken en begin vandaag nog met het personaliseren van uw promotionele gadgets!

PFC-2828-2 VA | Abmessungen 28 x 28 mm, Innendurchmesser 9,4 mm | Datenblatt PFC-5562-2 VA | Abmessungen 56 x 62 mm, Innendurchmesser 20,9 mm | Datenblatt

RASK 5-I-1 MAGNET TRÅDLØS LADING MED GODT UTSEENDE OG ELEGANT DESIGN. OG OMGIVELSESLYS Materiale:ABS + sinklegering Inndata:9V-4A 12V-2,5A Utgang mobiltelefon:15W/10W/7,5W Output Watch:3W Utgangsøreplugg:2W Størrelse:175*120*85 mm

EFFECTS AND ADVANTAGES The user is immobilized in the bed. The restraint belt immobilized the abdominal area and the shoulders. The restraint belt wears a strip of polypropylene to fix at the user in the bed and prevent that user is moved both sideways. COMPOSITION Antelina, velour and foam.the locking system is magnetic. But it is possible order Ironclip locking system. MEASURE the size of this model is M (75125 cm) This size is more common. But we can manufacture in other sizes S (6090 cm) and L (105145 cm). Regarding size of the bed, this model is for bed of 90 cm but it is possible manufacture the belt to bed of 105 cm and 150 cm. MAINTENANCE this model is padded material then can be washed in the machine at 40ºC. If you need more degrees we manufacture the same product in polypropylene and canvas material (90ºC) WARRANTY We recommend the ironclip locking system. If you choose the magnetic locking system please Reference:402550

Document sleeve with a magnetic strip on the back for use on metal surfaces. • Document sleeve in A4 format with two magnetic strips on the back • Perfect for use on metallic surfaces, such as warehouse shelves, racking and metal containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A4 portrait / 210 x 297 mm (W x H) • Suitable printable insert labels: Article number 485602 Colour:dark blue Material:plastics Reference:174407

Acti 9 - disjoncteur NG125LMA - 3P - 80A - Courbe MA - Ui 690V CA - Pouvoir de coupure : 100kA Icu - 220...240 V CA | 15kA Icu - 500 V CA | 40kA Icu - 440 V CA | 50kA Icu - 380...415 V CA - Uimp 8kV - 9 pas de 9 mm

Die HAMMEL MMA 1400 trennt präzise magnetische Metalle und nicht magnetische Materialien mittels Magnettrommel. Sie lässt sich für die Trennung von Autokarosserien, Aluminium, Metallschrott und Haushaltswaren einsetzen. Gewicht:9 t Leistung:12 kW

without shaft seal streamlined housing made of PP or ETFE volume flow of up to 200 l/min delivery head of up to 24 m.WG back pull-out Size:24/200 Material:PP (glass-fibre reinforced) / ETFE (carbon-fibre reinforced) Max. delivery head in [m.WG] 50 Hz:24 Max. volume flow in [l/min] 50Hz:200 Max. density in [g/cm3] 50Hz **:1.25 Motor capacity in [kW]:1.1 Current rating (400V, 50Hz) in [A]:2.25 Rated speed in [rpm] at 50Hz /60Hz:3000/3600 Suction port:DN 25*** Discharge port:DN 25*** Voltage in [V]:230/400V CA triphasé Protection class:IP 55 Max. flow velocity in [m/s]:côté aspiration = 1 / côté refoulement = 3 Max. temperature for PP/ETFE in [°C]:70/80 Max. system pressure for PP/ETFE at 20°C in [bar]:3,2

Silicon nitride magnetic rings are mainly used to protect high voltage electrodes and are widely used in the photovoltaic industry.Heat shields and magnetic rings, as well as ceramic rings, are collectively referred to as electrode shields.Silicon nitride electrode protection cover mainly uses silicon nitride insulation, heat resistance and corrosion resistance.Compared with the protective cover of quartz and alumina which is still in use today, the service life of the silicon nitride electrode shield is more than 10 times, and it will not be electrically broken down during use, and will not be heated, nor will it be heated. Will be eroded away. Due to its own stability, in the use of photovoltaic reduction furnaces, the collapse rate of non-human factors is greatly reduced. Silicon Nitride (Si3N4) Characteristics: 1 Good thermal shock resistance 2 Creep resistance 3 Low density 4 High fracture toughness 5 High hardness and wear resistance 6 Electrical resistivity

Manometer und Thermometer sind geeignet für die unterschiedlichen Anwendungen der Druck- und Temperaturmessung. Wir bieten Lösungen sowohl für gasförmige als auch für flüssige Messstoffe. Das Programm umfasst Kapsel-, Platten- oder Rohrfedermanometer und Messgeräte in verschiedenen Materialien vom Standardmodell über Edelstahlausführungen, zum Einsatz in korrosiver Umgebung bis hin zur elektronischen Messtechnik.

DESCRIPTION The Torque Powder Brakes (TPBSeries) are ideal for applications operating in the low speed range or middle to-high torque range. These magnetic powder brakes provide full torque at zero speed and are convection or air cooled, allowing power ratings up to 900W (2100W with air cooling). APPLICATIONS These units are suited for tension control applications, such as wire winding, foil, film, and tape tension control. Mounted on test benches, TPB Series - Torque Powder Brakes allow performance and reliability testing on driving elements such as electric motors, hand-held power tools, geared motors, reduction gears, and hydraulic transmission systems. Other applications include load simulation for life testing on electric motors, actuators, gearboxes, power steering, and many other rotating devices and assemblies. Available torque ratings:12, 25, 50, 100, 200, 400, 600N·m Braking power:up to 900W (2100W with air cooling) Rated torque available from:0rpm

Custom manufacturer of finest cannbis product packaging,custom size and styles are available

Sliding Folding Shutter covers a very small area when opened, thanks to its folding feature as well as sliding. The system works smoothly with its silent bearings, locking feature of the bearings when closed, opening lever and magnetic holder. The Sliding Folding Shutter stands out with its ability to be opened in parts or completely if desired. Sliding Folding Shutter system can be produced in 2 different models. Box form model and special design model.

Our rigid boxes have a stylish, luxurious, and prestigious look with their high-quality materials and the latest production technology for any usage purpose such as gifts, jewelry, watches, perfumes, etc...

The Saint Archangel Michael Prayer Choker Pendant is a beautiful blend of spirituality and elegance. Made from Silver 925, this pendant is meticulously crafted in Turkey. It features a high polished finish and a detailed depiction of Saint Archangel Michael, adding a touch of divine protection to your style. Our Saint Archangel Michael Choker Pendant is made from 100% recycled silver. This sustainable choice ensures that each piece is eco-friendly. Weighing just 29 grams, this pendant is lightweight yet durable. If you value both spirituality and sustainability, then this pendant is perfect for you. The design of this prayer choker pendant is versatile. It complements both casual and formal attire. Whether for daily wear or special occasions, this pendant enhances your look with its refined and spiritual design.

Magnetic film printing involves creating graphics on magnetic sheets, enabling easy attachment to metal surfaces. This method is popular for removable signage, vehicle magnets, and promotional displays. Magnetic film printing is versatile, allowing for quick changes in displays without permanent installation.

Exfoliante magnético N1 Este nuevo exfoliante facial con partículas magnéticas te ofrecerá un nuevo protocolo en el tratamiento de exfoliación facial. Nuestro gel transparente mezclado con polvo de magnetita negra muy puro te permitirá exfoliar tu rostro con altos rendimientos. Una vez realizado el cuidado, el gel se absorberá y simplemente tendrás que recoger las partículas con un imán que viene incluido en la caja. Modo de uso: Aplica el gel exfoliante facial, haz un masaje para exfoliar y retira la partícula con un imán. Este exfoliante se puede utilizar una vez a la semana. Precauciones: Evita el contacto con los ojos. Si entra en contacto con los ojos, enjuágalo inmediatamente con agua. Capacidad: 50ml. Reseñas Exfoliante Magnético Facial Nº1 No hay ninguna opinión de clientes por el momento. Referencia:5060465711588

We offer UV print on magnetic vinyl. Magnetic stickers can be fixed to any magnetic surface such as iron and steel and can be easily applied and removed leaving no residue. Suitable for use indoors and outdoors our magnetic signs are printed on an ultra-sturdy 900µ (0.9mm) thick magnetic substrate which are guaranteed to withstand the elements of the outside world for up to 2 years. We offer custom sizes and shapes.

Cinturon sujecion de pies magnético Ref.:101017

Produktion von bedruckten starren Schachteln in Sondergrößen. Möglichkeit des Drucks mit bis zu 4 Farben. Folienvergoldungsdruck. 2 mm grauer Karton 170 g/m² beschichtetes Papier, hochwertiger Karton, Bindegewebe Hersteller von maßgeschneiderten starren Boxen. Kaufen Sie starre Kartons starre Kartonverpackung Hersteller von starren Boxen starre Boxen kundenspezifische starre Boxen Luxuriöse starre Boxen Starre Boxen Truthahn starre Boxen Magnetboxen

Dimensions: 2 flaps (WxDxH): 50x15x70 cm, 3 flaps (WxDxH): 50x15x103 cm 3 Plus flaps (WxDxH): 50x15x114 cm, 4 flaps (WxDxH): 50x15x137 cm Magnetic flaps: The practical magnetic flaps are equipped with a robust closing mechanism. Metarial: The shoe cabinet is made of metal and will remain stable for many years. Delivery: Our shoe cabinet is delivered assembled. It can be easily mounted on the wall using existing screws and dowels. Shoe Cabinet Narrow Shoe Rack Metal Shoe Tipper with Magnet Flaps Shoe Rack Assembled and Wall Mounted Robust storage space Thanks to its durable metal parts, it guarantees robust storage space for many years. The compartments always open together. wall mounting It can be easily mounted on the wall using existing screws and dowels. Easy installation Our shoe cabinet is delivered pre-assembled.